Filter
Top Products
63 Troubleshooting
WLA-AWCG User Manual
Solutions:
To correct this:
1
Ensure that the network adapter is installed in the computer.
For instructions on how to do this, refer to the AirStation Pro Installation
chapter, “Network adapter installation” on page 29.
2
If the network adapter still cannot be found, remove the adapter and then re-
install it. Refer to your Windows documentation for instructions on how to do
this.
Cause 2:
The network adapter drivers have not been installed.
Solutions:
Ensure that the correct drivers for the network adapter are correctly installed.
If you are using the Wireless LAN card, refer to the Wireless LAN Card WLI-PCM L11
User’s Manual
for information. If you are using any other type of network adapter,
refer to the appropriate adapter documentation.
Cause 3:
Network adapter is configured incorrectly.
The network adapter may not be configured to meet the AirStation Pro
requirements.
Solutions:
Check the following items and re-install the network adapter again. See also
the
AirStation Pro Installation chapter, “Network adapter installation” on
page 29.