Filter
Top Products
Small Office Remote Access Switch 101
A
PPLE
T
ALK
R
OUTING
N
ETWORK
Configure the CyberSWITCH
CONFIGURING DEVICE INFORMATION
Select Security from the Main CFGEDIT Menu. The Security Menu will then be displayed as
follows:
We need to configure device information for our remote device, SITE2. Remote devices are
configured in the on-node authentication database.
After selecting Device Level Database(s) from the Security menu shown above, the following Device
Level Database Menu will be displayed.
Select On-node Device Entries from the above menu, then select to add a device. Enter SITE2 as the
device name. The following screen will then be displayed.
The three areas of information we must configure for device SITE2 are ISDN, Authentication, and
AppleTalk. The following sections will help you configure each of these three areas for device SITE2.
C
ONFIGURING DEVICE SITE2’S ISDN INFORMATION
We will begin by specifying the type of device. This device is an ISDN device, so we will select
ISDN from the Device Table Menu.
The ISDN Menu will then be displayed with preconfigured default values as shown below:
Security Menu:
1) Security Level
2) System Options and Information
3) Device Level Databases
4) User Level Databases (Enable/Disable)
5) Off-node Server Information
6) Network Login Information
Select function from above or <RET> for previous menu: 1
Device Level Database Menu:
1) On-node Device Database (Enable/Disable)
2) On-node Device Entries
3) Off-node Device Database Location
Select function from above or <RET> for previous menu: 1
Device Table Menu: (Device = "SITE2")
1) ISDN
2) Frame Relay
3) X.25
4) Authentication
5) IP
6) IPX
7) AppleTalk
8) Bridging
9) POTS
10) Compression
Select function from above or <RET> for previous menu: 1