Filter
Top Products
Small Office Remote Access Switch 43
IP R
OUTING
N
ETWORK
Configure the CyberSWITCH
The following screen will be displayed after all four devices in our example have been entered:
Return to the Security Configuration Menu.
C
ONFIGURING THE USER LEVEL DATABASES
This network doesn’t require the use of a user level database. Therefore, no changes are necessary.
C
ONFIGURING THE OFF-NODE SERVER INFORMATION
The default configuration for Off-node Server Information is None (Use On-node). Since this
network doesn’t require the use of an off-node server, no changes are necessary.
C
ONFIGURING THE NETWORK LOGIN INFORMATION
This network doesn’t require the use of a user level database so network login information
configuration is not necessary.
SAVE CONFIGURATION FILES
We have now configured all the required information for this example. Press 4 from the Main menu
to save the changes. The old configuration files will be stored in the \CONFIG directory with a file
extension of .BAK (e.g., the old NODE.NEI file will be called NODE.BAK).
After you save the configuration files, press <RET> to exit the CFGEDIT program. Reboot the
system to activate your changes.
Current Device Table (Sorted by Device Name in Ascending ASCII Order)
id DEVICE NAME
-----------------------------
1 "Jill Smith"
2 "Rick Bear"
3 "Todd Jones"
4 "Ralph Moose"
(1) Add, (2) Change, (3) Delete, (4) Display a Device or press <RET> for previous
menu?