Filter
Top Products
6H128-08 and 6H129-08 User’s Guide C-1
APPENDIX C
OPTIONAL INSTALLATIONS AND
MODE SWITCH BANK SETTINGS
This appendix covers the following items:
• Required tools (Section C.1)
• Locations, functions, and settings for the mode switches (Section C.2)
• Installing optional Fast Ethernet Interface Modules (Section C.3)
C.1 REQUIRED TOOLS
You need the following tools to perform the procedures in this appendix:
• An antistatic wrist strap (provided with 6C105 chassis).
• A Phillips screwdriver is required when installing optional Fast
Ethernet Interface Modules for ports 7 and 8 into the 6H12X-08.
C.2 SETTING THE MODE SWITCH
These switches are set at the factory and do not need to be changed unless
you intend to perform the following:
• Force download a new image file from a BootP server.
• Clear NVRAM and restore all user-entered parameters such as the IP
address and subnet masks to the 6H12X-08 “default” configuration
settings.
• Clear user-entered passwords stored in NVRAM and restore the
default passwords.
!
CAUTION
Only qualified service personnel should attempt the following
procedures.