Filter
Top Products
Connecting to the Network
6H128-08 and 6H129-08 User’s Guide 3-7
Figure 3-2 6H12X-08 Fiber Port Connection
4. Verify that a link exists by checking that the port RX LED is on
(flashing amber, blinking green, or solid green). If the RX LED is off
and the TX LED is not blinking amber, perform the following steps
until it is on:
a. Ensure that the power is turned on for the device at the other end
of the link.
b. Verify that the fiber connections between the applicable port on
the 6H12X-08 and fiber optic device on the other end of the fiber
optic link segment are properly crossed over.
NOTE
During the bootup process, the RX LED flashes green and
amber, and will not indicate if a link exists until bootup is
complete.
2
3
4
5
6
1
RX (Receive) LED
2159-03
Fiber Port
SC Connector
1
2
3
4
5
6