Filter
Top Products
Chapter 3: Installation
3-2 6H128-08 and 6H129-08 User’s Guide
3. Carefully remove the module, which is wrapped in a non-conductive
bag, from the shipping box.
4. Peel off the black and yellow tape seal on the non-conductive bag to
remove the module.
5. Remove the module from the non-conductive bag. Observe all
precautions listed on the non-conductive bag to prevent damage from
Electrostatic Discharge (ESD).
6. Perform a visual inspection of the module for any signs of physical
damage. If there are any signs of damage, contact the Cabletron
Systems Global Call Center. Refer to Section 1.7 for details.
3.2 INSTALLING 6H12X-08 OPTIONS
If installing the 6H12X-08 with an optional Fast Ethernet Interface
Module(s), refer to Appendix C for installation instructions.
Table 3-1 Contents of 6H12X-08 Carton
Item Quantity
6H128-08 or
6H129-08
1
Manual Accessory Kit 1
NOTE
Install any optional equipment before proceeding to
Section 3.3.