Filter
Top Products
Setting the Mode Switch
6H128-08 and 6H129-08 User’s Guide C-3
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on either the next power up or the next operation of the front
panel RESET switch. ALL user entered parameters, such as IP
addresses, subnet masks, SNMP traps, and switching functions are
restored to their factory default settings.
• Switch 8 – Reset Password/Community Strings. Changing the position
of this switch clears only the user-entered passwords stored in
NVRAM, and restores the default passwords. Once the 6H12X-08
resets, the passwords can either be reentered or the default passwords
(Public and ENTER) may be used.
NOTE
After changing the position of switch 6, DO NOT reapply power
to the chassis until there is a station acting as a BootP server,
which contains the image file.
NOTE
Do not change the position of switch 8 unless it is necessary to
reset the module super-user configured passwords to their
factory default settings.