Cabletron Systems ESX-1380 Switch User Manual


 
Chapter 2: Local Management Requirements
2-4 ESX-1320/ESX-1380 Local Management Guide
2.4 ESTABLISHING A TELNET CONNECTION
Once the ESX has a valid IP address, you can establish a Telnet session
with Local Management from any TCP/IP based node on the network.
Telnet connections to the host device require the community name
passwords assigned at the SNMP Community Names screen. Refer to the
SNMP Community Names section of this manual for additional
information about community names.
NOTE
See the instructions included with the Telnet application for
information about establishing a Telnet session.