Filter
Top Products
ESX-1320/ESX-1380 Local Management Guide 10-1
CHAPTER 10
THE PORT REDIRECT FUNCTION SCREEN
Figure 10-1 shows the Port Redirect Function screen. The Port Redirect
Function screen allows you to redirect frames from a source port to a
destination port. You can set a source port to have one or more destination
ports. For example, you can set port 1 as a source port with three
destinations, ports 2, 3, and 4. Traffic from port 1 is then automatically
redirected to ports 2, 3, and 4.
Figure 10-1 The Port Redirect Function Screen
NOTE
Although all traffic from the source port (not including errored
frames) is sent to the destination port, normal switching is still
performed for all frames on the source port.
Port Redirect Function
Source Port
— —
— —
— —
——
——
——
— —
——
— —
SAVE RETURN
090837
Destination Port
— —
— —
— —
——
——
——
— —
——
— —
Source Port [ ] Destination Port [ ] Status [ ]
Event Message Line
ESX-13XX Local Management
Flash Image Version: XX.XX.XX