Cabletron Systems ESX-1380 Switch User Manual


 
Changing Source and Destination Ports
ESX-1320/ESX-1380 Local Management Guide 10-3
7. Use the arrow keys to highlight the SAVE command field at the
bottom of the screen. Press ENTER. The message “SAVED OK” is
displayed. This saves the new settings and the SOURCE PORT and
DESTINATION PORT read-only fields are updated to include the
new settings.
NOTE
If you want to set more than one port redirect, repeat steps 1
through 6 for each additional setting, then go to step 7 to save
all the new settings at once.