Filter
Top Products
19
Basic Operation
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place your document face down.
3
Align the upper left edge of your document with the arrow mark.
•
If the document is a transparency, place white paper above the document.
4
Close the feeder.
Placing Documents in the Feeder
1
Spread the document guides a little wider than the document’s width.
• When placing large documents, pull out the tray extension.
2
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
Align the edges a few
times on a at surface.
CAUTION
When closing the
feeder, be careful not to
get your ngers caught.