Filter
Top Products
27
Basic Operation
Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1
Press [ ] (Select Paper/Settings).
2
Press [▲] or [
▼
] to highlight <Paper Settings>, and then press [OK].
3
Press [▲] or [
▼
] to highlight <Drawer 1> or <Drawer 2>, and then press
[OK].
4
Press [▲] or [
▼
] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select <Custom>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
5
Press [▲] or [
▼
] to highlight the desired paper type, and then press [OK].
6
Press [ ] (Select Paper/Settings) to close the screen.
Specify a Paper Size Manually
For paper size, specify within the possible range of length and width (<Y> ≥ <X>).
1
Press [▲] or [
▼
] to highlight <X>, and then press [OK].
2
Press [▲] or [
▼
] to specify the width, and then press [OK] or <Apply>.
3
Press [▲] or [
▼
] to highlight <Y>, and then press [OK].
4
Press [▲] or [
▼
] to specify the length, and then press [OK] or <Apply>.
5
Press [▲] or [▼] to highlight <Apply>, and then press [OK].