Filter
Top Products
37
Copy
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted,
[ ] is pressed or the screen is returned to the default screen after auto reset is performed.
1
Press [ ].
2
Press [▲] or [▼] to highlight <Copy Settings>, and then press [OK].
3
Press [▲] or [▼] to highlight <Change Default Settings>, and then press
[OK].
4
Press [▲] or [▼] to highlight the desired option, and then press [OK].
<Number of
Copies>
Select the copy quantity.
<Density> Make the density lighter or darker.
<Original Type> Select the image quality.
<2-Sided>* Copy 1-sided document to 2 sides.
<Copy Ratio> Select the copy ratio.
<Paper> Specify the paper source.
<N on 1> Copy multiple documents onto one sheet.
<Collate>
Collate copies of a complete copy job arranged in page
sequential order or by page.
<Erase Frame> Specify the width of the frame to erase.
<Sharpness> Emphasize the outline of the image or decrease the contrast.
<Color Balance> Adjust the levels of yellow, magenta, cyan, or black.
* MF8580Cdw only
5
Specify the desired setting.
6
After you have specied the setting, press <Apply>.
7
Press [ ] to close the screen.
You can register frequently used combinations of copy settings as
favorite settings (modes) on this machine. For details, see [Copying]
[Conguring Copy Settings to Your Needs] [Registering
Combinations of Frequently Used Copy Settings] in the e-Manual.