Filter
Top Products
84
Clean the Machine
Clean the exterior and interior of the machine, feeder, and the xing unit periodically.
Cleaning the Exterior
IMPORTANTIMPORTANT
For safety, be sure to turn OFF the machine and disconnect all cables from
the machine before cleaning the machine. When you nish cleaning the
machine, wait for it to dry completely before reconnecting the power cord,
and then turn ON the power.
1
Turn OFF the machine and disconnect all the cables from the machine.
2
Remove any documents from the platen glass or feeder.
3
Clean the exterior of the machine and ventilation slots with a soft, well
wrung-out cloth dampened with water or a mild detergent that has been
diluted with water.
4
Wait for the machine to dry completely.
5
Reconnect all the cables, and then turn ON the power.
Cleaning the Platen Glass
If a scanned image has unexpected specks, clean the platen glass.
1
Turn OFF the machine and disconnect all the cables from the machine.
2
Remove any documents from the platen glass.
3
Open the feeder.
4
Clean the areas with a cloth dampened with water. Then, wipe the area
with a soft, dry cloth.
5
Wait for the machine to dry completely.
6
Close the feeder.
7
Reconnect all the cables, and then turn ON the power.