Filter
Top Products
34
Chapter 2 Preparation Before Use
2
Turn the computer ON.
The OS on your computer starts up.
• If you are using Windows 95/98/Me or Windows 2000, then the first time that you turn
on your PC after connecting this scanner to your PC Windows’ Plug and Play function
will automatically display a screen prompting you to install the scanner driver. (The
name of this prompt screen varies among the different versions of Windows.)
In the case of “New Hardware Found” (Windows 95), select “Select from a list of
alternative drivers” and click OK. On the next screen, select Other Devices and then
click OK.
In the case of “Update Device Driver Wizard” (Windows 95), click Next and then click
Finish on the next screen.
In the case of “Add New Hardware Wizard” (Windows 98), follow the procedure
described below.
1. Click Next.
2. Select “Search for the best driver for your device (Recommended)” and then click
next.
3. Clear all checkmarks and then click Next.
4. Click Next.
5. Click Finish.
In the case of “Add New Hardware Wizard” (Windows Me), select “Automatic search
for a better driver (Recommended)”, then click Next and then click Finish on the next
screen.
In the case of “Found New Hardware Wizard” (Windows 2000), follow the procedure
described below.
1. Click Next to advance to the “Install Hardware Device Drivers” screen.
2. Select “Search for a suitable driver for my device (recommended)”, and then click
Next to proceed to the “Locate Driver Files” screen.
3. Clear all of the checkmarks in the “Optional search locations”, and then click Next
to proceed to the “Driver Files Search Results” screen.
4. Select “Disable the device.” and then click Finish.
• The driver application provided with the scanner must be installed to use the scanner.
For details, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility
5000 Instructions.”
Turning the Power OFF
For your safety, disconnect the power plug from the power outlet if you are not using
the scanner for a long time.
1
Turn the computer OFF.
2
To turn the scanner OFF, press the power switch.
Wait at least 10 seconds before turning the scanner ON again.
HINT
CAUTION
CAUTION