Filter
Top Products
58
Chapter 3 Preparing Documents
Setting Scan Conditions
The conditions that are applied when you scan a document are set on the
operation panel. Basically, the following three items are set:
• Basic settings
Set the most basic scan conditions: feed mode, brightness, simplex/duplex,
etc.
• Setting by function keys
Call up settings already registered to a function key to use these settings.
• User mode setting
Set the scanner operation mode (user mode) for items such as the original
detection method.
The following describes each of these setting methods.
Only some of the available scan conditions are set on the operation panel. More
detailed settings are set in the application. For details, refer to the separate “ISIS/
TWAIN Driver Instructions” or “Scanning Utility 5000 Instructions.”
MEMO