Filter
Top Products
7-16 Sending Faxes Chapter 7
7 Enter up to 116 fax numbers you want
to send to using any of the following
methods:
❚ One-touch speed dialing:
Press the one-touch speed dialing
button(s) you want.
❚ Coded speed dialing:
Press Coded Dial, then use the
numeric buttons to enter the two-
digit code you want. Repeat for other
codes.
•Be sure to press Coded Dial before
each code.
❚ Regular dialing:
Use the numeric buttons to enter the
fax number you want, then press
Set.
•You can only enter one fax number this
way.
❚ Directory dialing:
Press Directory, then use the
numeric buttons to enter the first
letter of the other party’s name. Use
∂ or ¨ to find the name you want.
n
• If you enter the wrong
destination, press
Clear, then
enter the correct destination.
•To review the destinations
entered, use ∂
or ¨ to scroll
through the numbers.
8 Press Start/Copy to begin scanning
the document into the machine’s
memory.
•When the preset time is reached, your
machine sends the document to the
destination(s) you specified in step 7.
n
•You can register up to 20 different delayed sending operations.
• If the machine’s memory becomes full while scanning your document,
MEMORY FULL
will appear in the LCD. If this happens, you will not be able to send the document at a
preset time. Remove the remainder of the document from the ADF (you may need to
open the operation panel to do so).
• Since the machine is multitasking, you can perform other tasks even when your machine
is set for delayed sending.
04=Canon ITALIA
1ST LETT OF NAME
TEL= 2 88x xxxx
A 01=Canon Inc.
A
01=Canon EUROPA