Filter
Top Products
Chapter 2 Setting Up 2-17
Setting Up
Follow this procedure to load a stack (max. 0.4 in./10 mm stack height) of letter-size
plain paper in the multi-purpose tray:
1 Remove the multi-purpose tray cover
from the machine.
2 Prepare a stack of paper by tapping
it on a flat surface to even its edges.
3 Open the paper guides to the
approximate width of the stack.
4 Insert the stack into the multi-purpose
tray q (print side facing you and top
edge first), then adjust the paper
guides to the width of the paper w.
•Make sure there are no gaps between
the paper guides and the paper stack.
1
2
2