Filter
Top Products
8-8 Receiving Faxes Chapter 8
Receiving Faxes Automatically: FAX ONLY MODE
If you have a separate telephone line for fax use only, connect your machine to this line
and set FAX ONLY MODE.Your machine will answer all calls as fax calls.
Setting FAX ONLY MODE
Follow this procedure to set the receive mode to FAX ONLY MODE:
1 Press Function.
2 Press Data Registration.
3 Press Set.
4 Use ∂ or ¨ to select RX SETTINGS.
5 Press Set.
6 Use ∂ or ¨ to select RX MODE.
7 Press Set.
8 Use ∂ or ¨ to select FAX ONLY MODE.
9 Press Set.
10 Press Stop/Reset to return to standby
mode.
11 Confirm that FaxOnly is displayed in
the LCD.
• If FaxOnly is not displayed, follow steps 1
to 3 on top of p. 8-3.
The machine treats all incoming calls as fax calls. It receives faxes automatically and
disconnects any voice calls.
n
The machine does not ring when it receives a fax call. If you want to be alerted when a fax
call is received, connect the handset or an extension telephone to the machine, and enable
the
INCOMING RING setting (1 p. 14-7). You can also select the number of rings before
the machine answers (1
RING COUNT, p. 14-7).
12/26 FaxOnly
12/26 FaxOnly
INCOMING RING
FAX ONLY MODE
FAX/TEL AUTO SW
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION