Filter
Top Products
13-12 Troubleshooting Chapter 13
PSWD TX REJECTED
REC’D IN MEMORY
SELECT POL REJCT
SUBADD TX REJECT
TX/RX CANCELLED
TX/RX NO. nnnn
TX/RX NO. nnnn
SCANNING P.nnn
MEMORY FULL
(Three messages toggle.)
#081
—
#082
#080
—
—
—
You attempted to send a
document with a
password, but the other
party’s fax machine does
not support reception
with a password.
The machine received
the fax in memory
because paper or toner
ran out, or a paper jam
occurred during
reception.
The loaded paper size
may not match the size
of the fax being received.
You attempted to poll a
fax machine with a
subaddress, but the other
party has not set a
subaddress or their fax
machine does not
support polling with a
subaddress.
You attempted to send a
document with a
subaddress, but the other
party’s fax machine does
not support reception
with a subaddress.
You pressed Stop/Reset
to cancel a transaction.
The number shown
(
nnnn) is a unique
identification number
assigned to the
document you are
sending or receiving.
The machine is sending
a document and its
memory is full.
Contact the other party to
check their settings. If their
fax machine does not
support reception with a
password, delete the
password you have
registered (1 pp. 6-3, 6-8).
Load paper in the multi-
purpose tray (1 p. 2-16),
replace the cartridge
(1 p. 12-7), or clear the
paper jam (1 p. 13-3).
Load the correct paper in
the multi-purpose tray
(1
p. 2-16).
Contact the other party to
check their settings. If their
fax machine does not
support polling with a
subaddress, delete the
subaddress you have
registered (1 pp. 6-3, 6-8).
Contact the other party to
check their settings. If their
fax machine does not
support reception with a
subaddress, delete the
subaddress you have
registered (1
pp. 6-3, 6-8).
—
This number appears in
reports so you can identify
transactions. Write the
number down if you will
need it later.
The machine continues to
send the document as
memory becomes
available.
Message Error Code Cause Action