Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CONTENTS
T3
3.6 The copy is foggy (entire face)
.............................................. 4-13T
3.7 The copy is foggy (vertical).. 4-14T
3.8 The copy has a black line (vertical,
fuzzy, thick) .......................... 4-14T
3.9 The copy has a black line (vertical,
fine) ....................................... 4-15T
3.10 The copy has a white spot (vertical)
.............................................. 4-16T
3.11 The copy has a white line (vertical)
.............................................. 4-16T
3.12 The copy has a white spot (horizon-
tal) ......................................... 4-17T
3.13 The back of the copy is soiled/
Soiled edge............................ 4-18T
3.14 The copy has a fixing fault ... 4-19T
3.15 The copy has a displaced leading
edge ....................................... 4-20T
3.16 The copy has a displaced leading
edge (large margin) ............... 4-20T
3.17 The copy has a displaced margin
(no margin) ........................... 4-20T
3.18 The copy is blurred ............... 4-21T
3.19 The copy is foggy (horizontal)
.............................................. 4-22T
3.20 The copy has inadequate sharpness
.............................................. 4-23T
3.21 The copy is completely blank
.............................................. 4-24T
3.22 The copy is completely black
.............................................. 4-26T
3.23 The copy has a block/white dot af-
ter replacement of the drum unit
.............................................. 4-27T
3.24 The copy has a black line (stream
reading) ................................. 4-27T
4 Troubleshooting Malfunctions .... 4-28T
4.1 Power Supply System ........... 4-28T
4.1.1 The AC power is absent .. 4-28T
4.1.2 The DC power is absent
........................................ 4-29T
4.2 Printer Unit ........................... 4-30T
4.2.1 Pickup fails ..................... 4-30T
4.2.2 The lifter fails to move up
(pickup from the cassette)
........................................ 4-31T
4.2.3 The vertical path roller fails to
rotate ............................... 4-32T
4.2.4 The registration roller fails to
rotate ............................... 4-32T
4.2.5 Pickup from the multifeeder
tray fails (i.e., the pickup roller
fails to rotate).................. 4-33T
4.2.6 Pickup from the multifeeder
tray fails (i.e., the multifeeder
holding plate fails to move up)
........................................ 4-33T
4.2.7 The photosensitive drum fails to
rotate ............................... 4-34T
4.2.8 The pre-exposure lamp fails to
go ON ............................. 4-34T
4.3 Reader Unit ........................... 4-35T
4.3.1 The No. 1 mirror base fails to
move ............................... 4-35T
4.3.2 The scanning lamp fails to go
ON .................................. 4-36T
4.4 Message Indication ............... 4-37T
4.4.1 The “Add Toner” message fails
to go OFF........................ 4-37T
4.4.2 The “Control Card Set” mes-
sage fails to go OFF (when no
card reader is installed)... 4-37T
4.4.3 The “Add Paper” message fails
to go OFF........................ 4-37T
4.4.4 The “Close the Front Cover”
massage fails to go OFF .. 4-38T
4.5 Paper Deck ............................ 4-39T
4.5.1 Pickup fails ..................... 4-39T
4.5.2 The deck lifter fails to move up
........................................ 4-40T
5 Troubleshooting Feeding Faults ... 4-41T
5.1 Paper Jams ............................ 4-41T
5.1.1 Pickup Assembly ............ 4-42T
5.1.2 Separation/Feeding Assembly
........................................ 4-43T
5.1.3 Fixing/Delivery Assembly, Du-
plex Reversing Assembly
........................................ 4-43T