Filter
Top Products
5Before Printing
z Setting the Power Save Mode
The machine enters Power save mode if not operated for a certain interval. In the Power save
mode, the internal fluorescent lamp is turned off, and only the POWER lamp stay lit. You can
configure the interval that the machine waits before entering Power save mode. See "Other
Settings" in "Changing the Machine Settings" of User's Guide on-screen manual.
When you try to copy or scan, the machine will exit from Power save mode.
If you use the machine frequently, we recommend that you set the Power save transfer time to 1
hour or 4 hours.
z The Screen-saver Mode
The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the
display. You cannot change the wait time before the LCD goes out.