Filter
Top Products
3-2 Using the MultiPASS Fax Setup Utility Chapter 3
N
When the MultiPASS is connected to your computer, be sure to use
the MultiPASS Fax Setup Utility. Do not make your changes using
the operator panel of the MultiPASS.
The following instructions summarize the overall procedures for
configuring Fax Setup options in the MultiPASS Fax Setup Utility.
❍ To view or change the MultiPASS Fax Setup settings and options in
the Fax Setup dialog box, click the appropriate tab to display the Fax
Setup panel you want to access—Preferences, Send Fax, Receive Fax,
or Speed Dial.
❍ Once you have the appropriate Fax Setup panel displayed, specify
your changes.
❍ To save changes and close the dialog box, click OK.
❍ To exit the dialog box without saving your changes, click Cancel.
❍ To restore all MultiPASS Fax settings to the defaults that were set at
the factory, click Factory Defaults. To restore only the defaults for
settings on a specific Fax Setup panel, click the Restore Defaults
button on that panel.
When you save your changes, the MultiPASS Fax Setup options are saved
in the MultiPASS Fax Setup Utility, as well as on the MultiPASS unit.