Filter
Top Products
2. SERVICING TOOLS
2.1 List of Tools
Part 5: Maintenance
BJC-7100
5-2
Ordinary Tools
Phillips screwdriver
Blade screwdriver
Tweezers
Flat brush
Multimeter
Note
For removing and replacing screws
For removing plastic parts
For removing and installing coil springs
For applying grease (one per grease type)
For troubleshooting
Special Tools (part No.)
Grease (MOLYKOTE PG-641)
(CK-0562)
Tension spring
(QY9-0046)
Gap gage 1.2mm
THICKNESS GAUGE KIT
(QY9-0030-000)
THICKNESS ADJUSTER
(QY9-0031-000)
Note
For application to specified locations (see Figure 5-1.)
For use when securing idler pulley (See Figure 5-9.)
For use when checking and adjusting plate-head gap
For use when checking and adjusting platen-head gap
(See Figure 5-15 to 5-20)
For use when checking and adjusting platen-head gap
(See Figure 5-15 to 5-20)