Filter
Top Products
2. TRANSPORTING THE PRINTER
When carrying or transporting the printer, keep the BJ cartridge installed in the printer
or stored in the cartridge container.
This prevents the ink from leaking and drying out in the nozzles.
Also when both BC-61 and BC-62e Photo are in use, keep one cartridge installed in the
printer and the other in the container.
2.1 Transporting the Printer
When transporting the printer, follow the procedure below:
1) Press the
POWER
button to turn off the printer.
2) Disconnect the interface cable.
3) Unplug the AC adaptor power cable from the wall outlet.
4) Open the front cover and check that the carriage is locked in the capping position
(right side of printer). If a fault has occurred and the carriage is not in the capping
position, move it manually to the capping position. (See below: Operations performed
only by service personnel)
If a fault has occurred and the user has moved the printer without the carriage being
locked in the capping position, tape the carriage to the opposite side (left side) of the
printer as an emergency measure.
5) Close the front cover
6) Pack the printer in its original packing materials. Be sure to use cushioning
materials.
Part 3: Operating Instructions
BJC-7100
3-12
Emergency MeasureCapping Position
Figure 3-15 Transporting the Printer