Filter
Top Products
108
Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
settings] >
[Projector on]
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto
Power-Off
> [System settings] > [Auto power-
off]
You can turn off the lamp or
projector automatically in order to
save power when the projector is not
in use.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [15 min.] is the factory default.
• You cannot enable the [Direct power on]
function (see the next item), if you select
[Disabled].
HDMI Component LAN
Digital PC Analog PC USB
Skip Projects an input signal
immediately after turning on
the projector.
Canon
logo
Displays the Canon logo that
was registered in advance at
the factory.
User logo The user logo is projected.
HDMI Component LAN
Digital PC Analog PC USB
5 min.–
60 min.
If the selected time elapses
without any input signal, the
projector displays the
countdown of the time until the
projector will be turned off.
Disabled Disable auto power-off.