Filter
Top Products
Completing Projector Settings
167
Installation and Maintenance Connecting to a Network
Registering a Network
Password
> [Network settings] > [Register
network password]
Register the projector network
password.
When [Register network password] is
selected, the window shown below
appears.
Enter a 4-digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons on the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• If you forget the password, press [ ] [OK]
[ ] [OK] [ ] [OK] to restore the factory
default setting.
Enabling/Disabling
Wired Network
Functions
> [Network settings] > [Network
function (wired)]
You can turn the projector network
function on or off. Power can be
saved by turning the function [Off].
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Off Disables the network function.
On Enables the network function.