Canon WUX450 Projector User Manual


 
Before Installation
127
Installation and Maintenance Installation
Install facing in the correct direction
When installing the projector facing upward or downward, specify which way the projector
is facing in [Install settings] > [Professional settings] > [Vertical projection]. (P148)
10° 10°
10° 10°
10°
10°
The projector can be installed facing any direction*
1
, as shown
below. However, projection upward ( ) or downward ( ) may
shorten the useful life of the lamp. Installation in these orientations
also requires projector settings adjustment. Specifically, for upward
or downward projection, refer to instructions for [Vertical projection]
(P148) in the [Install settings] menu.
*1 No optional accessories are available for installing the projector in
ways other than ceiling installation (P37, P130, P299).
*2 Failure to do so may damage the lamp.
Upward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
2
Downward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.
*
2
If installing the
projector on the floor
or hanging from the
ceiling, the left / right
inclination of the
projector should be no
more than 10°.*
2
Do not use the
projector standing
on its side.
This may
damage the lamp.