Canon WUX450 Projector User Manual


 
206
Installing the NMPJ Application
To use the NMPJ function, you must install the NMPJ application.
Instructions in this manual are for installation in a Windows 7 environment.
System Requirements
Application system requirements are as follows.
CPU Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit)
Memory 1 GB or more
HDD 32 GB or more
Monitor 1024x768 min. resolution
Operating System
Windows XP Professional SP3
Windows Vista Business SP2
Windows 7(Home/Professional/Ultimate) SP1
* Windows XP and Vista compatibility is limited to 32-bit editions.
* Both 32- and 64-bit editions of Windows 7 are supported.
Network In TCP/IP network environments, projectors can be connected to
computers via the following LAN connections.
Wired LAN (1000BASE-T, 100BASE-TX)
Cannot be installed on computers without a minimum resolution of
1024x768. Additionally, operation is not ensured if the resolution is
switched to less than 1024x768 after installation.
Operation is not ensured in other operating systems or editions.
Menus are in English in all cases, except in Japanese and Simplified
Chinese versions of the application.
Operation is not ensured in operating systems other than English,
Japanese, or Simplified Chinese OSes.
Operation is not ensured in Windows 8.
Although the application also supports computer-projector
communication over a router, operation is only ensured over one
router hop. Additionally, to use Broadcast mode (P245) with
projectors in other subnets, the router must support IPv4 multicast
routing. Note that the router must be set up to route multicast
addresses used by the application.
If you are using an Aero style in Windows, this message may be
displayed: “Do you want to change the color scheme to improve
performance?”