Filter
Top Products
2
How to Use This Manual
Thank you for purchasing a Canon projector.
The WUX450 / WX520 Multimedia Projector (hereinafter referred to as “the
projector”) is a high-performance projector that is capable of projecting a
high-resolution computer screen and high-quality digital image on a large
screen.
This Manual
This manual combines the user’s manual for WUX450/WX520 Multimedia
Projectors. The “Operation” section (P47) describes how to use the projector. The
“Installation and Maintenance” section (P121) describes initial setup and regular
maintenance. For instructions on software for projection by multiple projectors
linked in a local network, refer to the “Networked Multi-Projection (NMPJ)” section
(P201). Read this manual thoroughly to make the most of your projector. Installation
of the projector should be performed by a qualified technician, if possible. Contact
the Canon Customer Support Center for further information.
Symbols Used in This Manual
Meanings of the symbols used in this manual are as follows.
A precaution about operation or restriction is given here.
Indicates supplemental information to note in use.
Selecting Screen Aspect
Select the correct aspect ratio for the screen which is used.
1 Press the MENU button to display the menu window.
2 Press the [ ] / [ ] buttons to select the [Install settings] tab.
Remote control Projector
Remote control Projector
Symbols of Button Operations
The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of the
projector.
In this document, the button’s operations are shown as below.
Operation of buttons
on side of projector
Remote control button
operation
Indicate the buttons to be pressed