Filter
Top Products
Installation-Related Menu Settings
159
Installation and Maintenance Installation
Here, you can use the following settings in the edge blending menu.
2 Select [Adjustment type] > [Black level].
3 Select [D-area base], and use the remote’s [ ] [ ] buttons to adjust the
values for area D.
As you watch the image, adjust the values so that the brightness and colors of
the blending area and area D match. Adjust [D-area base] to lighten the black
level, and adjust [Red], [Green], and [Blue] to obtain an optimal black level
color tone, as needed.
4 Repeat this adjustment on all projectors.
Black level
adjustment
Adjust the black level of non-overlapping image areas.
Off
Adjust
Adjustment
type
Black
level
D-area base Adjust the area D black level.
D-area red Adjust the red component of the
area D black level.
D-area green Adjust the green component of the
area D black level.
D-area blue Adjust the blue component of the
area D black level.