Canon WUX450 Projector User Manual


 
Completing Computer Settings
184
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Displaying the Network Configuration Screen” (P177).
Item Explanation Factory default setting
Mail authentication Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.
OFF
User name
Enter the user name to use for
mail authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
<Blank>
Password
Enter the password for mail
authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
<Blank>
Confirm password For confirmation, enter the
same password as you
entered in [Password].
<Blank>
POP3 server IP address Enter the POP3 server IP
address in 1-byte numbers.
0.0.0.0
POP3 server port number Enter the POP3 server port
number in 1-byte numbers (1 -
65535).
110
POP before SMTP response
time
Enter the SMTP authentication
timeout period after POP3
authentication (units:
milliseconds) using 1-byte
numbers (0 - 9999
milliseconds).
300