Filter
Top Products
1-2 EdgeFLEX 600 – Release 2.0
EdgeFLEX 600 Overview
Hardware Overview
Hardware Overview
The EdgeFLEX 600 is a carrier-class multiservice telecommunications switch. The EdgeFLEX 600
complies to the building equipment standards published by both Telcordia (NEBS) and the European
Telecommunications Standards Institute (ETSI). It is 10.40 inches (6 rack-units, 264.16 mm) in height,
17.26 inches (438.4 mm) wide, and 11.81 inches (300 mm) deep with cables, and may be installed in a
ETSI-compliant 600mm or 300mm rack or NEBS-style 19- or 23-inch rack.
EdgeFLEX 600 Front View
The following illustration shows the front view of the EdgeFLEX 600 equipped with typical interfaces.
The paragraphs following the illustration describe the corresponding features indicated in the
illustration.
Management (MGMT) card provides:
• alarm relay contacts (inputs and outputs)
• system timing inputs and outputs
• management serial ports
• out-of-band management Ethernet ports
• GBIC slots for passive CWDM Mux/Demux or Optical Add/Drop Multiplexor modules
• System Lamp Test button and Alarm Cutoff switch
SCPX - System Controller and Packet Fabric; also provides trunk interfaces (either Gigabit Ethernet
or SONET/SDH)
SCPX 2 - slot for second System Controller and Packet Fabric, with trunk interfaces; equipping the
EdgeFLEX 600 with two SCPX cards provides for redundant operation.
PODs - hot-swappable interface modules, up to six per EdgeFLEX 600 chassis
Dual redundant hot-swappable DC power supply modules
Dual redundant fan trays and an air filter (behind decorative bezel) EdgeFLEX 600
EdgeFLEX 600
EdgeFLEX 600
84/63 CESoP SERVER
ACT/SBY
1
84/63 IMA / PACKET SERVER
T1/E1 MULTISERVICE
1
2
4
3
5
6