Filter
Top Products
3-4 EdgeFLEX 600 - Release 2.0
Adding and Replacing Components
Replacing a Fan Tray
2. With a #2 Phillips screwdriver, unscrew the captive thumbscrews at the top and bottom of the
filter cover by turning them counterclockwise until the filter cover is free from the chassis.
Place the filter cover to one side.
3. With the fan tray cover removed, the EdgeFLEX 600’s fan tray will be visible, as shown in the
figure below.
removal handle
Fan Tray
removal handle
Retaining screws
for Fan Tray
Air Filter