Filter
Top Products
20
Projection Operations
To operate the computer with the remote controller
1. Use the mini D-Sub cable and USB cable that come with the projector
to connect the computer to the projector. After that, turn on the
projector and the computer.
z See the following for more information.
)Connecting a Computer to the Projector (User’s Guide (Basic Operation))
)Connecting a Computer to the Projector’s USB Port (page 67)
2. On the remote controller, press the [RGB] key to select RGB as the
input source.
z You can also select the input source using the projector’s [INPUT] key.
3. Use the remote controller to perform mouse operations as described
below.
z Note that wireless mouse operations are not possible while a manual keystone correction
(page 10), volume adjustment (page 13), image enlargement (page 14), or P-IN-P (page 15)
operation is in progress, or while the menu is displayed (page 21). Wireless mouse
capabilities will be restored as soon as the operation that disabled them is complete.
z Note that wireless mouse operation is not supported when the input signal from the
computer is larger than XGA, and “Resize Image To Fit” (page 38) is turned off. Wireless
mouse operation will be supported for an input signal that is larger than XGA if “Resize
Image To Fit” is turned on.
z Note that drag-and-drop is not supported by wireless mouse operations.
To do this: Use this remote controller key:
Move the pointer on the computer screen
up, down, left, or right
Cursor key
Scroll up one page [PAGE UP]
Scroll down one page [PAGE DOWN]
Perform a left-click operation [ENTER]
Perform a right-click operation [ESC]