Filter
Top Products
60
Using the Setup Menu
■Option Settings2
J
Power On AF/AK Mode
You can specify either of two different auto adjustment operations to be performed whenever
the projector is turned on.
Input Source Specific Menu Items
Setting Explanations
Continuous AF/AK: Turning on the projector while this setting is selected displays an
alignment chart and performs a continuous Auto Focus operation.
Pressing the [AF/AK] key at this time performs auto keystone
correction.
Off: Turning on the projector while this setting is selected restores the
focus and keystone correction settings that were in effect when the
projector was last turned off.
Setting Storage
A single setting is stored, which is applied to all input sources.
z When Continuous AF/AK is selected as the power on AF/AK mode, a custom logo is not
projected when power is turned on even if one is specified as the startup screen (page
40).
z For more information about Continuous AF/AK, see “Auto Focus and Auto Keystone
Correction (AF/AK)” (page 9).
z For information about the focus setting, see “To focus the image” (page 7). For
information about keystone correction, see “Keystone Correction (AF/AK, KEYSTONE)”
(page 8).
z When Continuous AF/AK is turned off, turning off projector power while focus is near its
maximum or minimum setting can cause the projected image to be out of focus the next
time power is turned on. If this happens, adjust focus manually or press the [AF/AK] key.
Input Source Available Items (Parentheses indicate defaults.)
RGB Continuous AF/AK, (Off)
Component
S-VIDEO
VIDEO
No Signal