Filter
Top Products
Appendix
73
The projector does not
project any image from the
connected device.
The connected computer or video device may not
be turned on, or it may not be outputting a video
signal.
JMake sure the connected computer or video
device is turned on, and perform the required
operation on it to output a video signal.
—
The correct output source is not selected on the
projector.
JOn the projector, select the input source that
corresponds to the device whose image you
are trying to project.
page 6
The projector does not
correctly project the image
from the connected device.
Images may not project correctly when you have
the component output terminal of a video device
connected to the RGB terminal of the projector.
JTry using the projector’s VIDEO input terminal
or S-VIDEO input terminal (see “Connecting to
a Standard Video Device”).
User’s
Guide
(Basic
Operation)
Images sent from a computer over an RGB cable
may not project correctly if [Component] is
selected for the “Input Settings J RGB Input”
menu setting.
JTurn off the projector and disconnect the AC
cord and RGB cable. Next, reconnect the AC
cord only and turn on power. Change the
“Input Settings J RGB Input” menu setting to
[RGB]. Try projecting again.
page 42
When RGB/Component is
selected as the input
source, the color of the
projected image or the
image itself is abnormal.
The settings configured on the setup menu’s
“Input Settings J RGB Input” menu may not be
compatible with the device connected to the RGB
input terminal.
JUse the setup menu to configure the “Input
Settings J RGB Input” menu settings to correct
the problem.
page 42
The projector keys to not
work.
Key lock or power on password may be turned
on.
JTurn off key lock and/or power on password.
page 47
Problem Cause and Recommended Action See