Filter
Top Products
68
Appendix
The projector outputs images using XGA (1024 pixels × 768 pixels) video resolution. When
the input signal from the computer connected to the projector is not an XGA signal, “Resize
Image To Fit” automatically enlarges or reduces the image so it matches the projector’s video
resolution and fills the entire screen. The following shows how different input signals from a
computer are adjusted during projection.
z Resizing of an input image by “Resize Image To Fit” can call coarsening of the image or
can cause part of the image to be cut off. If this happens, try turning off “Resize Image
To Fit”. See “Screen Settings J Resize Image to Fit” on page 38 for more information.
Full-screen Display of an RGB Image
Input Signal Example Projected Image
When the input signal has a resolution of
1280 × 1024 (aspect ratio: 5:4), the original
image is compressed so it conforms to the
projection resolution of 1024 × 768 (aspect
ratio: 4:3). Because of this, the projected
image may appear slightly wider horizontally
than the original image.
800
×
600
1024
×
768
1280
×
1024