Cisco Systems 2960 Switch User Manual


 
Contents
xxii
Catalyst 2960 Switch Software Configuration Guide
78-16881-01
Configuring Egress Queue Characteristics 29-62
Configuration Guidelines 29-62
Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set 29-62
Mapping DSCP or CoS Values to an Egress Queue and to a Threshold ID 29-64
Configuring SRR Shaped Weights on Egress Queues 29-66
Configuring SRR Shared Weights on Egress Queues 29-67
Configuring the Egress Expedite Queue 29-68
Limiting the Bandwidth on an Egress Interface 29-68
Displaying Standard QoS Information 29-69
CHAPTER
30 Configuring EtherChannels 30-1
Understanding EtherChannels 30-1
EtherChannel Overview 30-2
Port-Channel Interfaces 30-3
Port Aggregation Protocol 30-4
PAgP Modes 30-4
PAgP Interaction with Other Features 30-5
Link Aggregation Control Protocol 30-5
LACP Modes 30-5
LACP Interaction with Other Features 30-6
EtherChannel On Mode 30-6
Load Balancing and Forwarding Methods 30-6
Configuring EtherChannels 30-8
Default EtherChannel Configuration 30-9
EtherChannel Configuration Guidelines 30-9
Configuring Layer 2 EtherChannels 30-10
Configuring EtherChannel Load Balancing 30-12
Configuring the PAgP Learn Method and Priority 30-13
Configuring LACP Hot-Standby Ports 30-14
Configuring the LACP System Priority 30-15
Configuring the LACP Port Priority 30-15
Displaying EtherChannel, PAgP, and LACP Status 30-16
CHAPTER
31 Troubleshooting 31-1
Recovering from a Software Failure 31-2
Recovering from a Lost or Forgotten Password 31-3
Procedure with Password Recovery Enabled 31-4
Procedure with Password Recovery Disabled 31-6