Filter
Top Products
Contents
v
Catalyst 2960-S Switch Hardware Installation Guide
OL-19732-04
Link Status 3-2
10/100 or 10/100/1000 Port Connections 3-3
10/100 or 10/100/1000 PoE Port Connections 3-3
SFP and SFP+ Module 3-3
Interface Settings 3-3
Ping End Device 3-4
Spanning Tree Loops 3-4
Switch Performance 3-4
Speed, Duplex, and Autonegotiation 3-4
Autonegotiation and Network Interface Cards 3-4
Cabling Distance 3-5
Clearing the Switch IP Address and Configuration 3-5
Finding the Switch Serial Number 3-5
Replacing a Failed Stack Member 3-9
APPENDIX
A Technical Specifications A-1
APPENDIX
B Connector and Cable Specifications B-1
Connector Specifications B-1
10/100 Ports (Including PoE) B-1
B-2
10/100/1000 Ports (Including PoE) B-2
SFP Module Connectors B-2
Cables and Adapters B-3
SFP Module Cables B-3
Cable Pinouts B-5
Console Port Adapter Pinouts B-6
APPENDIX
C Configuring the Switch with the CLI-Based Setup Program C-1
Accessing the CLI Through Express Setup C-1
Accessing the CLI Through the Console Port C-1
Connecting the RJ-45 Console Port or USB Console Port C-2
Installing the Cisco Microsoft Windows USB Device Driver C-3
Installing the Cisco Microsoft Windows XP USB Driver C-3
Installing the Cisco Microsoft Windows 2000 USB Driver C-4
Installing the Cisco Microsoft Windows Vista USB Driver C-4
Uninstalling the Cisco Microsoft Windows USB Driver C-5
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver C-5
Uninstalling the Cisco Microsoft Windows Vista USB Driver C-5