Filter
Top Products
640 - 607
Leading the way in IT testing and certification tools, www.testking.com
- 102 -
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 413-414.
Q. 165
What is the most common mail to device?
A. Hub
B. Router
C. Repeater
D. Switch
Answer: D
Q. 166
While you are preparing the initial configuration of your router and enable IP you find that you need to
use a telnet session to check for a network address parameter. Your telnet logging and your virtual
transmission session on the other device are successful. What is the default that you must enter to
suspend your Telnet session and return to the original router?
A. Suspend
B. The command exit
C. CTRL – ESC followed by x
D. CTRL – ALT – DEL followed b ESC
E. CTRL- Shift-6 followed by x
Answer: E
Explanation: To suspend a Telnet session and escape from the remote target system back to your local switch
or router, press the keys Ctrl-Shift-6 at the same time, release the key sequence, and then press the character x.
Incorrect Answers:
A, B, C, and D are incorrect; these are not the proper key combinations to suspend a Telnet session.
Steve McQuerry. Interconnecting Cisco Network Devices
. (Cisco Press: 2000) pages 122-123.
Q. 167
Which ex command displays system configuration information, software version and the names and
sources of configuration files and boot images on a router?
A. show boot