Filter
Top Products
640 - 607
Leading the way in IT testing and certification tools, www.testking.com
- 67 -
Answer: D
Explanation: A 100BaseT cable cannot be any longer than 100 meters.
Incorrect Answers:
A, B, C, & E are wrong.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) page 45.
Q. 103
Which command sets the clock rate to 56 Kbps on serial0?
A. clockrate 56
B. clock rate 56
C. clockrate 56000
D. clock rate 56000
E. set clockrate 56
F. serial 10 clockrate 56
G. clock rate 56000 serial 10
Answer: D
Explanation: The proper syntax to set the clock rate is clock rate {speed}. Please remember the speed cannot
be abbreviated.
Incorrect Answers:
A and C are incorrect; clock rate must be separated.
B is incorrect; the speed cannot be abbreviated and must be 56000.
E, F and G are incorrect; this are not valid commands.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 105-106.
Q. 104
If you are in IOS user mode which command do you use to enter the privileged mode?
A. Set
B. Enable
C. Configure
D. Privileges
Answer: B
Explanation: To change from the user EXEC mode to the privileged EXEC mode the command is enable.