Filter
Top Products
640 - 607
Leading the way in IT testing and certification tools, www.testking.com
- 111 -
Incorrect Answers:
C is incorrect; hierarchical areas make for a more efficient use of address but will not prevent loops.
D is incorrect; link State is a different method than Vector Routing, they are not combined for loop elimination.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 266-270.
Q. 178
Which command should you use to configure a router so that it can become a TFTP host for router
system image that is run in Flash?
A. Copy flash tftp
B. Config tftp server
C. Write network <router name>
D. Tftp-server system <filename>
E. Setup server tftp <systemname>
Answer: A
Explanation: This is a poorly written question. When interrupted this question is asking how can a tftp server
can use use a routers IOS image that is stored in the flash memory. The answer is use the command copy flash
tftp.
B is incorrect; this is not a valid command.
C is incorrect; this is not a valid command.
D is incorrect; this is not a valid command.
Q. 179
Which commands loads a new version of Cisco IOS into the router?
A. Copy flash ftp
B. Copy ftp flash
C. Copy flash tftp
D. Copy tftp flash
Answer: D
Explanation: Whenever you need to load a new copy of the IOS onto the router (because the old one is
damaged or you are upgrading you can download a copy of the new image from the tftp server. The proper
command is copy tftp flash.