Filter
Top Products
640 - 607
Leading the way in IT testing and certification tools, www.testking.com
- 114 -
B. Line console
Login
Password Cisco
C. Line login terminal
Password Cisco
D. Line console 0
Login
Password CISCO
E. Line console 0
Login
Password Cisco
Answer: E
Explanation: This is the proper procedure.
Incorrect Answers:
A is incorrect; this set of commands are used to establish a login password for incoming Telnet sessions.
B is incorrect; the first command is incomplete. The command should be line console 0.
C is incorrect; there is no such command.
D is incorrect; whenever you are entry a password great care must be taken, as passwords are case sensitive. In
this case the password is suppose to be Cisco and not CISCO.
Steve McQuerry. Interconnecting Cisco Network Devices. (Cisco Press: 2000) pages 101-103.
Q. 184
You just entered the following command
routers(config) #line console 0
Which operation is most likely to follow?
A. Configure terminal type
B. Enter protocol parameters for a serial line
C. Create a password on the console terminal line.
D. Establish a terminal type 4 connection to a remote host.
E. Change from configuration mode to console privilege mode.
Answer: C