Filter
Top Products
22 Updates to Cisco AS5300 Universal Access Server Module Installation and Software Configuration Guides
Upgrading VoIP Card VCWare
2 5300# copy tftp: vfc:
Address or name of remote host []?
223.255.212.244
Source file name []? /
path
/vcw-vfc-mz.4.0.bin
Destination file name []? vcw-vfc-mz.4.0.bin
Accessing tftp://223.255.212.244/
path
/
vcw-vfc-mz.4.0.bin...
Loading vcw-vfc-mz.4.0.bin from 223.255.212.244
(via Ethernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!![OK - 491256/982016 bytes]
Use TFTP to download the new VCWare
to VFC Flash memory. In this example,
slot 1 is chosen by default.
Note The destination image name must
begin with “vcw-” (all lowercase) and no
other character can be in front of vcw-, so
no directory path should be included at the
beginning of the image name. Be
absolutely certain to get the name right. If
one character or space is wrong, the file
will not be recognized and will not be
copied over.
3 5300# show vfc
slot_number
technology
5300#
Reports the type of DSPs supported (C542
or C549) by the VCWare.
4 5300> clear vfc
slot_number
Do you really want to reset this card ?
[y/n] y
Please, wait...
Reloads the VFC code from Flash memory
for the specified slot before you unbundle
the new VFC image.
Press y to verify the reset function.
5 5300# unbundle vfc
slot_number
Do you want to continue ? [y/n]: y
Unbundle the DSPWare from the VCWare
and configure the default file list and the
capability list. (See Step 7 and Step 8.)
Continue by pressing y when the prompt
appears.
6 5300# show vfc
slot_number
directory
5300#
Verify that the DSPWare is unbundled.
7 5300# show vfc
slot_number
default-file
5300#
Verify that the default file list is initiated.
8 5300# show vfc
slot_number
cap-list
5300#
Verify that the capability list is initiated.
9 5300# reload
Reboot the Cisco AS5300 so these
changes take effect.
Table 4 Replace Firmware in ROM Monitor Mode (continued)
Step Command Purpose