Filter
Top Products
12-16
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Message Severity Threshold
When you subscribe a destination profile to the Syslog alert group, you can set a threshold for the
sending of alert group messages based on the level of severity of the message. Any message with a value
lower than the destination profile specified threshold is not sent to the destination.
The severity threshold is configured using the keywords in Table 12-1 and ranges from catastrophic
(level 9, highest level of urgency) to debugging (level 0, lowest level of urgency).
Other alert groups do not allow setting a threshold for severity.
Note Call Home severity levels are not the same as system message logging severity levels.
Table 12-1 Severity and Syslog Level Mapping
Level Keyword Syslog Level Description
9 catastrophic — Network-wide catastrophic failure.
8 disaster — Significant network impact.
7 fatal Emergency (0) System is unusable.
6 critical Alert (1) Critical conditions, immediate attention needed.
5 major Critical (2) Major conditions.
4 minor Error (3) Minor conditions.
3 warning Warning (4) Warning conditions.
2 notification Notice (5) Basic notification and informational messages.
Possibly independently insignificant.
1 normal Information (6) Normal event signifying return to normal state.