Filter
Top Products
12-21
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Specifying HTTP Proxy Server
To specify an HTTP proxy server for sending Call Home HTTP(S) messages to a destination, perform
the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. http-proxy {ipv4-address | ipv6-address | name} port port-number
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters Call Home configuration submode.
Step 3
http-proxy {ipv4-address | ipv6-address | name} port
port-number
Example:
Router(cfg-call-home)# http-proxy 1.1.1.1 port 1
Specifies the proxy server for the HTTP request.