Filter
Top Products
12-17
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Configuring Snapshot Command List
To configure the snapshot command list, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. [no | default] alert-group-config snapshot
4. [no | default] add-command command string
5. end
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters Call Home configuration submode.
Step 3
[no | default] alert-group-config snapshot
Example:
Router(cfg-call-home)# alert-group-config snapshot
Enters snapshot configuration mode.
The no or default command will remove
all snapshot command.
Step 4
[no | default] add-command command string
Example:
Router(cfg-call-home-snapshot)# add-command “show version”
Adds the command to the Snapshot alert
group. The no or default command will
remove the corresponding command.
• command string—IOS command.
Maximum length is 128.
Step 5
end
Example:
Router(cfg-call-home-snapshot)# end
Exits and saves the configuration.