Filter
Top Products
CHAPTER
15-1
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
15
Configuring Support for Remote Management by
the Cisco Prime Network Services Controller
• Configuring the Management Interface to Support Remote Management by the Cisco Prime
Network Services Controller
• Configuring Remote Management by Cisco Prime Network Services Controller
Configuring the Management Interface to Support Remote
Management by the Cisco Prime Network Services Controller
You can use the Cisco Prime Network Services Controller to provision, manage and monitor the Cisco
CSR 1000V. For information on feature support, see the “Managing the Router Using Cisco Prime
Network Services Controller” section on page 1-20. This procedure configures the Cisco CSR 1000V
management interface to support remote management using the Cisco Prime Network Services
Controller.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface mgmt-interface
4. ip address mgmt-ipv4-addr
5. no shutdown
6. exit
7. interface virtualportgroup virtual-port-group-number-number
8. ip unnumbered management-interface
9. no shutdown
10. exit
11. virtual-service csr_mgmt
12. vnic gateway virtualportgroup virtual-port-group-number-number
13. guest ip address remote-mgmt-ipv4-addr
14. exit