Filter
Top Products
D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com
68
Cisco TelePresence MX Series
ADMINISTRATOR GUIDE
Under ideal lighting conditions the bandwidth requirements
can be substantially reduced with the optimal definitions
profiles.
Generally, we recommend the Optimal Definition set at
Normal.
If lighting conditions are good we recommend that you test
the endpoint on the various Optimal Definition settings before
deciding on a profile.
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > OptimalDefinition >
Profile and select the optimal definition profile.
You can set a resolution threshold below which the maximum
frame rate will be 30 fps.
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > OptimalDefinition >
Threshold60fps and select a threshold.
The video input quality settings must be set to Motion for the
Optimal Definition to work. With the video input quality set to
Sharpness, the endpoint will transmit the highest resolution
possible, regardless of frame rate.
Go to Advanced Configuration on the web interface and
navigate to Video > Input > Source [1..n] > Quality and set the
video quality parameter.
You can read more about the video settings in the
Advanced settings chapter.
Table 1: Optimal definition for systems supporting 1080p
w288p30 w448p30 w576p30 720p30 1080p30
Normal 256 kbit/s 512 kbit/s 768 kbit/s 1152 kbit/s 2560 kbit/s
Medium 128 kbit/s 384 kbit/s 512 kbit/s 1152 kbit/s 1920 kbit/s
High 128 kbit/s 256 kbit/s 512 kbit/s 768 kbit/s 1472 kbit/s
Table 2: Optimal definition for systems supporting 720p60
w144p60 w288p60 w448p60 w576p60 720p60
Normal 128 kbit/s 512 kbit/s 1152 kbit/s 1472 kbit/s 2240 kbit/s
Medium 128 kbit/s 384 kbit/s 768 kbit/s 1152 kbit/s 1920 kbit/s
High 128 kbit/s 256 kbit/s 512 kbit/s 768 kbit/s 1152 kbit/s
Typically used in dedicated video
conferencing rooms. Requires good
lighting conditions for a good overall
experience.
Under ideal conditions the
bandwidth requirements can be
reduced by up to 50%.
Typically used in rooms with better
than normal, and consistent lighting.
The bandwidth requirements can be
reduced by up to 25%.
This setting is typically used in
office environments where the
environment is normal to poorly lit.
Generally, we recommend the
Optimal Definition set at Normal.
Introduction
Table of contents
Web interface
Advanced settings
AppendicesAppendices